EasyManuals Logo

HOLDEN MP SPARK User Manual

HOLDEN MP SPARK
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #164 background imageLoading...
Page #164 background image
Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
162 Vehicle Care
Fog Lamps
1. Turn the front wheels and
remove 2 push nuts on outside
of wheel liner.
2. Disconnect the electrical
connector from the bulb holder.
3. Press the tabs and remove the
bulb holder from the lamp.
4. Pull bulb out of the bulb holder.
5. Install a new bulb into the
holder.
6. Reinstall the bulb holder into
the lamp and ensure it locks in
place.
7. Reconnect the electrical
connector.
8. Check lamp operation.
Front Turn Signal Lamps
1. Rotate the bulb holder
anticlockwise to disengage.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HOLDEN MP SPARK and is the answer not in the manual?

HOLDEN MP SPARK Specifications

General IconGeneral
BrandHOLDEN
ModelMP SPARK
CategoryAutomobile
LanguageEnglish

Related product manuals