Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
Vehicle Care 165
Interior Lamps
Courtesy lamps
Type 1
Type 2
1. Using a flat-blade screwdriver,
prise the lamp assembly
outwards, from the side
opposite the lamp switch.
2. Remove the bulb.
3. Insert a new bulb.
4. Reinstall the lamp assembly
firmly into place.
5. Check lamp operation.
Electrical System
Fuses
{
Warning
Turn off the ignition and any
electrical equipment before
changing a fuse.
.
Replace blown fuses promptly.
.
A blown fuse can be recognised
by its melted wire.
.
Do not replace the fuse until the
cause of the fault has been
remedied.
.
Some functions are protected by
several fuses.
.
The vehicle may not be
equipped with all of the fuses,
relays and features shown.
Fuse extractor
A fuse extractor is located in the
fuse box in the engine compartment.
To Next Page
Loading...
