Holden Spark (Next Gen) Owner Manual (GMK-Localising-Holden-9507018) -
2016 - crc - 11/19/15
140 Driving and Operating
For safety reasons, the cruise
control cannot be activated until the
foot brake has been operated once.
Activating in first gear is not
possible.
Do not use the cruise control if it is
not advisable to maintain a constant
speed.
Control indicator
5. Control
Indicators 0 55.
{
Warning
Do not use the cruise control
when road or driving conditions
require varying speeds.
A consistent speed isn't practical
in heavy, varying traffic or on
winding, slippery or rough roads.
The cruise control does not apply
the vehicle's brakes. Therefore
the vehicle may gain speed when
going down steep hills.
When climbing steep hills, the
vehicle may lose speed. You may
need to switch off cruise control
and use the accelerator pedal.
Switching on
Press 5; the control indicator 5 in
the instrument cluster illuminates
white.
Activation
1. Accelerate to the desired
speed and turn the thumb
wheel to SET/-: the current
speed is stored and
maintained.
2. The control indicator
5 in the
instrument cluster illuminates
green.
3. The accelerator pedal can be
released.
Vehicle speed can be increased by
depressing the accelerator pedal.
When the accelerator pedal is
released, the previously stored
speed is resumed.
Cruise control remains activated
while gear shifting.
To Next Page
Loading...
Need help?
General
