TLi
IQ
System User Manual 4 − 31
Section 4 − Software Functions - Detailed Descriptions
The analyzer then prompts the user to insert the QCette and press
ENTER. A two-minute timer starts during which time this message
flashes and the analyzer beeps. Insert the QCette and press ENTER.
This message willI be displayed if the QCette is not inserted. Press
ENTER to continue. Then insert the QCette and press ENTER.
The analyzer will begin initializing the QCette. Do not disturb the
analyzer until the results are displayed. The initialization process will take
approximately 12-15 minutes. Initialization can be terminated by pressing
ESC.
To Next Page
Loading...