TLi
IQ
System User Manual 4 − 30
Section 4 − Software Functions - Detailed Descriptions
The most recent USER ID is always displayed. Press ENTER to accept
the ID, or enter a new User ID. This field will accept 15 alpha or numeric
characters. To leave this field blank, delete the information using the ←
key.
The QCette SN must be entered to proceed to the next step. The serial
number is printed on the QCette plastic housing. The software requires
that the serial number is entered in the correct format: six numeric
characters (e.g., 001004). Enter all leading zeros.
This message will be displayed if a cassette is present in the analyzer
prior to reaching the next screen. Remove cassette and press ENTER.
To Next Page
Loading...