104
OPERATION
3. If the overheat warning system
stays activated, stop the engine.
Tilt up the outboard motor and
check the water intakes for
obstructions. If there are no
obstructions at the water intakes,
return to the closest boat landing
and contact your closest authorized
Honda outboard motor dealer.
When the PGM-FI activated:
1. Consult with an authorized Honda
outboard motor dealer.
When the ACG warning system is
activated.
1. Check the battery (see page 129). If
the battery is OK, consult with an
authorized Honda outboard motor
dealer.
When the water separator buzzer
sounds:
1. Check the water separator for water
contamination. If water is
accumulated, drain them (see page
126).
COOLING WATER INTAKE PORT
(each side)
42ZVL600.book 104 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
