40
CONTROLS AND FEATURES
For the sake of the operator’s and the
passengers’ safety, be sure to set the
emergency stop switch clip located at
one end of the emergency stop switch
lanyard with the emergency stop
switch. Attach the other end of the
emergency stop switch lanyard
securely to the operator.
Spare Emergency Stop Switch Clip
(optional equipment)
A spare emergency stop switch clip is
available from your outboard motor
dealer.
A spare emergency stop switch clip
can be stored in the tool bag (see page
115).
If the emergency stop switch
lanyard is not set, the boat might
run out of control when the
operator, for example, falls
overboard and is not able to
operate the outboard motor.
EMERGENCY STOP
SWITCH CLIP
STOP
(D1, D2 type)
EMERGENCY STOP SWITCH
EMERGENCY STOP
SWITCH LANYARD
(R1 type)
STOP
STOP
EMERGENCY STOP
SWITCH CLIP
EMERGENCY STOP
SWITCH LANYARD
EMERGENCY
STOP SWITCH
LANYARD
EMERGENCY STOP
SWITCH CLIP
(R2, R3 type)
EMERGENCY STOP SWITCH
EMERGENCY STOP SWITCH
42ZVL600.book 40 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
