112
TRANSPORTING
3. Secure the outboard motor on an
outboard motor stand with the
mounting bolts and nuts.
4. Remove the hoist hook and
reinstall the engine cover (see page
57).
Trailering
When trailering or transporting the
boat with the outboard motor
attached, it is recommended that the
outboard motor remain in normal
running position.
Do not trailer or transport the boat
with the outboard motor in the
tilted position. The boat or
outboard motor could be severely
damaged if the outboard motor
drops.
The outboard motor should be
trailered in the normal running
position. If there is insufficient road
clearance in this position, then trailer
the outboard motor in the tilted
position using an outboard motor
support device such as a transom
saver bar, or remove the outboard
motor from the boat.
42ZVL600.book 112 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
