Honda BF200D - Stopping the Engine; Emergency Engine Stop; Normal Engine Stop Procedures

107
9. STOPPING THE ENGINE
Emergency Engine Stop
(D1, D2 types)
Pull the curl cord of the emergency
stop switch and remove the lock plate
from the switch; this will stop the
engine.
It is a good idea to stop the engine
with the emergency stop switch
lanyard from time to time to be sure
that the emergency stop switch is
operating properly.
Normal Engine Stop
(D1, D2 type)
1. Move the shift lever to NEUTRAL
position.
After sailing with the throttle fully
open, cool down the engine by
running it at the idle speed for a few
minutes.
EMERGENCY
STOP SWITCH
CLIP
EMERGENCY STOP
SWITCH
LANYARD
STOP
EMERGENCY STOP
SWITCH LANYARD
STOP
EMERGENCY
STOP SWITCH
CLIP
(R2, R3 type)
EMERGENCY STOP SWITCH
LANYARD
(R1 type)
42ZVL600.book 107 ページ ２０１８年７月１９日 木曜日 午前９時６分