79
STARTING THE ENGINE
If the engine is not properly
warmed-up before raising the
engine speed, the warning buzzer
and overheat indicator may
activate and the engine speed will
be automatically reduced.
Before leaving the dock, check the
operation of the emergency stop
switch.
Station Select Mode
For multiple station type, use the [-]
switch to change the operating
station.
If you press and hold the [-] switch of
the inactive station when all remote
control lever is in the NEUTRAL
position, you can operate the
outboard motors using this station.
A long buzz sounds once and the
ACT indicator comes on when the
station can be operated.
ACT INDICATOR
PRESS and HOLD
[-] SWITCH
42ZVL600.book 79 ページ ２０１８年７月１９日 木曜日 午前９時６分
To Next Page
Loading...
