＊
○
○
○
○
○
○
○
○
○
○
○
○
○
＊
＊
112
MAINTENANCE
REGULAR SERVICE PERIOD
Perform at every indicated month or operating hour
interval, whichever comes first.
ITEM
Fuel line
Battery and cable connection
Bolts and Nuts
Crankcase breather tube
Cooling water passages
Water pump
Emergency stop switch
Engine oil leak
Each operation part
Engine condition (5)
Power Trim/Tilt
Shift cable
(3)
Check-tightness
Check
Clean
Check level-tightness
Check
Check
Check
Check
Check
Check
Each use
After use
First month
or
20 hrs.
Every year
or
200 hrs.
Every
2 years
or
400 hrs.
(4)
(2)
Check-adjust
Check
Replace
(2)
(3)
(4)
(5)
(7)
(8)
(9)
(8)
Every 2 years (If necessary) (2) (9)
(2)
(2)
(2) (7)
(2)
(2)
Every
6 months
or
100 hrs.
Emission item for Bodensee model.
These items should be serviced by your servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the Honda
Shop Manual for service procedures.
For professional commercial use, log hours of operation to determine proper maintenance intervals.
When operating in salt water, turbid or muddy water, the engine should be flushed with clean water after each use.
Upon starting, check for unusual engine sounds and cooling water flowing freely from the check hole.
The user who performs shift operation frequently will recommend you exchange of a shift cable around three years.
Check the fuel line for leaks, cracks, or damage. If it is leaking, cracked, or damaged, take it to your servicing dealer for replacement before
using your outboard.
Replace the fuel line if there are signs of leaks, cracks, or damage.
11/09/05 18:14:31 32ZY0620_112
To Next Page
Loading...
