120
Lubrication
MAINTENANCE
CLAMP SCREWS
TILLER HANDLE
PROPELLER SHAFT
ADJUSTING ROD/
TILT STOPPER
SHIFT SHAFT
TILT SHAFT
MOUNT FRAME
SWIVEL CASE
Wipe the outside of the engine with a cloth dipped in oil.
Apply marine anticorrosion grease to the following parts:
20 operating hours or a month after the date of purchase
for initial lubrication, then every 100 operating hours or 6
months.
Apply anticorrosion oil to pivot surfaces where grease
cannot penetrate.
11/09/05 18:16:05 32ZY0620_120
To Next Page
Loading...
