〈〉
−
＋
＋
＋
−
−
−
＋
−
−
＋
When disconnecting the battery
cable, be sure to disconnect at
the battery negative ( )
terminal first. To connect,
connect at the positive ( )
terminal first, then at the
negative ( ) terminal. Never
dis/connect the battery cable in
the reverse order, or it causes a
short circuit when a tool
contacts the terminals.
119
Installation check:
Battery Cleaning
MAINTENANCE
NEGATIVE ( )
TERMINAL
POSITIVE ( )
TERMINAL
RED
BLACK
Check that the cables are connected
to the battery terminals securely.
Tighten the terminals if they are
loose.
Disconnect the battery cable at the
battery negative ( ) terminal, then
at the battery positive ( ) terminal.
Connect the battery positive ( )
cable to the battery positive ( )
terminal, then the battery negative
( ) cable to the battery negative
( ) terminal. Tighten the bolts
and nuts securely. Coat the battery
terminals with grease.
Remove the battery and clean the
battery terminals and battery cable
terminals with a wire brush or sand
paper.
Clean the battery with a solution
of baking soda and warm water,
taking care not to get the solution
or water in the battery cells. Dry
the battery thoroughly.
1.
2.
3.
11/09/05 18:15:57 32ZY0620_119
To Next Page
Loading...
