123
MAINTENANCE
ARROW
(Fuel Flow Direction)
PRIMER BULB
CCLLOOSSEE
OOPPEENN
FUEL FILLER CAP
VENT KNOB
Install the new fuel filter so that
the arrow mark on the fuel filter is
toward the fuel pump side.
If loss of power or hard starting is
found caused by excessive water or
sediment accumulated in the fuel
filter, inspect the fuel tank. Clean the
fuel tank if necessary.Fuel flow will be impeded if the
filter is installed backward.
Turn the vent knob to OPEN side,
squeeze and release the priming
bulb to feed the fuel, and check
for leaks.
Connect the fuel lines to the fuel
filter securely with the line clips.
2.
3.
4.
11/09/05 18:16:35 32ZY0620_123
To Next Page
Loading...
