Honda CB300FA - Rear Seat; Removing & Installing Body Components

emovmg & lnsta ing Body Components
Rear Seat
Prongs
Rear stays
I Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the rear seat
up and back.
I Installation
1. Insert the prongs into the rear stays on the
frame.
2. Push down on the rear of the rear seat.
Make sure
that the seat is locked securely
in pos ition to pu ll it up lightl y.
The seat locks automatica ll y when closed.
Take
care not to lock your key in the
compartment under the rear seat.
I
s:
"'
:::l
...+
ro
:::l
"'
:::l
("\
ro
49