Honda CB300FA - Side Stand

I
s::
OJ
:J
r+
Ill
:J
OJ
:J
'"'
Ill
66
Side Stand
1. Check that the side stand operates
smoothly.
If the side stand is stiff or
squeaky, clean the pivot
area and
lubricate the pivot bolt
with clean grease.
2.
Check the spring for damage or loss of
tension.
3. Sit on the motorcycle, put the
transmission
in Neutral, and raise the side
stand.
4. Start the engine, pull the clutch lever in,
and shift the transmission into gear.
5. Lower the side stand all the way. The
engine should stop as you lower the side
stand. If the engine doesn't stop, have
your motorcycle inspected by your dealer.