Honda CB360 - Page 65

b. Place the Нее end of the bleeder hose
into a glass container which has some
hydraulic brake fluid in it so that the
end of the hose can be submerged.
Ф Level mark 1
І
|
Bleeding the brake system: |
The brakes must be bled with great care [è
subsequent to work performed on ће è-
brake system, when the lever becomes Ф
soft or spongy, or when lever travel is
excessive. The procedure is best per-
Bleeder hose
c. Fill the reservoir using only the recom-
formed by two mechanics. mended brake fluid. Screw the cap
a.Remove the dust cap from the bleeder partially on the reservoir to prevent
valve and attach bleeder hose ©. entry of dust.
57