EasyManua.ls Logo

Honda CB400A - Page 40

Honda CB400A
115 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Maintenance
Maintenance Fundamentals
3. If the terminals are heavily corroded, clean
and polish the terminals with a wire brush
or sandpaper. Wear safety glasses.
4. After cleaning, reinstall the battery.
The battery has a limited life span. Consult
your dealer about when you should replace
the battery. Always replace the battery with
another maintenance-free battery of the same
type.
NOTICE
Installing non-Honda electrical accessories can overload
the electrical system, discharging the battery and possibly
damaging the system.
Fuses
Fuses protect the electrical circuits on your
motorcycle. If something electrical on your
motorcycle stops working, check for and
replace any blown fuses.
P.9 0
Inspecting and Replacing Fuses
Turn off the ignition switch to remove and
inspect fuses. If a fuse is blown, replace with a
fuse of the same rating. For fuse ratings, see
“Specifications.
P.10 8
Blown fuse
NOTICE
Replacing a fuse with one that has a higher rating greatly
increases the chance of damage to the electrical system.
32MFM630.indb 37 2010/12/14 15:44:12

Table of Contents

Other manuals for Honda CB400A

Related product manuals