Troubleshooting
Electrical Trouble
a
Burned-out Light Bulb
❙
Headlight Bulb
1. Remove the screws from the headlight
case.
2. Gently pull the lower end of the
headlight forward and remove the
headlight.
3. Disconnect the connector by pressing
tabs.
Screw
Screw
Connector
Tabs
Headlight
4. Remove the dust cover.
5. Unhook the pin and remove the bulb.
6. Install a new bulb in the reverse order of
removal.
a
Install the dust cover with its“TOP”
mark facing up.
Do not touch the glass surface of a new
headlight bulb with your fingers. If you
touch the bulb with your bare hands, clean
it with a cloth moistened with alcohol.
Pin
“TOP”mark
Bulb
Dust cover
To Next Page
Loading...
