Honda CB400A - Drive Chain

56
Maintenance
Brakes
a
Inspecting the Brake Pads
Inspecting the Brake Pads
Check the condition of the brake pad
groove wear indicators.
(CB400)
Front
The pads need to be replaced if a
brake pad is worn to the bottom of the
groove.
Rear
The pads need to be replaced if a
brake pad is worn to the groove.
1.
Front
Inspect the brake pads from in
front of the brake caliper.
a
Always inspect both left and right
calipers.
2.
Rear
Inspect the brake pads from the
rear right of the motorcycle.
If necessary have the pads replaced by your
dealer.
Always replace both left and right brake
pads at the same time.
Front Rear
Disc
Brake pads
Wear
indicator
Wear
indicator
Brake pads
Wear
indicator
Wear
indicator
Brake pads
Disc
32MFM630.indb 56 2010/12/14 15:44:22