Maintenance
Engine Oil
a
Changing Engine Oil & Filter
7. Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8. Install a new oil filter and tighten.
Torque: 26 N·m (2.7 kgf·m, 19 lbf·ft).
9. Replace the sealing washer. Install the
drain bolt and tighten.
Torque: 30 N·m (3.1 kgf·m, 22 lbf·ft).
10. Fill the crankcase with the recommended
oil (
P.38
) and install the oil fill cap.
Required oil
When changing oil &
engine oil filter:
3.2 litres (3.4 US qt, 2.8 Imp qt)
When changing oil only:
3.0 litres (3.2 US qt, 2.6 Imp qt)
11. Check the oil level.
P.49
12. Check that there are no oil leaks.
NOTICE
Improper installation of the oil filter can result in serious
damage to the engine.
To Next Page
Loading...
