Maintenance
Removing & Installing Body Components
a
Battery
3. Disconnect the negative terminal from
the battery.
4. Disconnect the positive
terminal from
the battery.
5. Remove the battery taking care not to
drop the terminal nuts.
❙
Installation
Install the parts in the reverse order of
removal. Always connect the positive
terminal first. Make sure that bolts and nuts
are tight.
The clock will be reset AM 1:00 if the
battery is disconnected.
To set the clock, see “Operation Guide.”
P.17
For proper handling of the battery, see
“Maintenance Fundamentals.“
P.36
Battery Goes Dead
P.8 6
Battery
Negative
terminal
Positive
terminal
(CB400)
Battery
Positive
terminal
Negative
terminal
(CB400A)
To Next Page
Loading...
