Troubleshooting
Warning Indicators ON or Flashing
a
ABS (Anti-lock Brake System) Indicator (CB400A)
ABS (Anti-lock Brake System)
Indicator (CB400A)
If the indicator operates in one of the
following ways, you may have a serious
problem with the brake system. Reduce your
speed and have your motorcycle inspected
by your dealer as soon as possible.
Indicator comes ON or starts flashing
●
while riding.
Indicator does not come ON when the
●
ignition switch is in the ON position.
Indicator does not go OFF at speeds
●
above 10 km/h (6 mph).
If the ABS indicator stays ON, your brakes
will continue to work as a conventional
system, but without the anti-locking
function.
The ABS indicator may flash if you turn the
rear wheel while your motorcycle is lifted off
the ground. In this case, turn the ignition
switch OFF and then ON again. The ABS
indicator will go OFF after your speed
reaches 30 km/h (19 mph).
To Next Page
Loading...
