Honda CB400A - Page 96

93
Troubleshooting
Electrical Trouble
a
Blown Fuse
❙
FI Fuse
(CB400)
1. Remove the left side cover.
P.4 6
2. Open the fuse holder.
3. Pull out the FI fuse and check for a blown
fuse. Always replace a blown fuse with a
spare of the same rating.
a
Spare fuse is provided in the fuse box.
P.9 0
4. Close the fuse holder.
5. Install the left side cover.
(CB400)
Fuse holder
FI fuse
(CB400A)
1. Remove the left side cover.
P.4 6
2. Open the fuse box cover located beside
the left rear suspension.
3. Pull out the fuse and check for a blown
fuse. Always replace a blown fuse with a
spare of the same rating.
4. Close the fuse box cover.
5. Install the left side cover.
FI fuse
Spare fuse
(CB400A)
Fuse box cover
NOTICE
If a fuse fails repeatedly, you likely have an electrical
problem. Have your motorcycle inspected by your dealer.
32MFM630.indb 93 2010/12/14 15:44:43