Honda CB750F2 - Side Stand

SIDE
STAND
(Refer
to the maintenance
precautions
on
page
50
).
Perform
the
following
maintenance
in
accordance
with
the maintenance
schedule.
Functional
Check:
o
Check the spring
(1)
for damage
or loss
of tension and
the side
stand assembly
for freedom
of movement.
.
Check the side
stand ignition
cut-off
system:
l-.
Sit astride
the motorcycle;
put
the
side stand up
and the transmission
in
neutral.
2.
Start the
engine and
with the clutch
lever
pulled
in,
shift the transmission
into
gear.
3.
Lower the
side stand.
The engine
should stop as
you put
the side stand
down.
If
the side
stand system
does not operate
as
described,
see
your
authorized
Honda
dealer for
service.
66
(1)
Side
stand spring