17
INITIAL USE INSTRUCTIONS
ENGINE OIL
The generator is shipped WITHOUT OIL in the engine.
1. Place the generator on a level surface.
2. Remove the oil filler cap/dipstick by turning it counterclockwise.
3. Add enough oil to bring the oil level to the upper limit mark on the oil
dipstick. SAE 10W-30 API service category SJ or later (or equivalent) is
recommended for general use; for additional recommendations (see
page 18).
Maximum oil capacity: 1.2 US qt (1.1 L)
Do not overfill the engine with oil. If the engine is overfilled, the excess oil
may be transferred to the air cleaner housing and air filter.
4. Reinstall the oil filler cap/dipstick securely.
OIL FILLER CAP/DIPSTICK
UPPER LIMIT
LOWER LIMIT
31Z238200.book 17 ページ ２０２０年２月２０日 木曜日 午前１０時５７分
To Next Page
Loading...
