OPERATION
52
GFCI System ② (120V-20A Duplex Receptacle)
1. Unplug all tools and appliances from the generator.
2. Start the engine (see page 44).
3. Turn OFF the auto throttle switch (see page 45).
4. Turn the AC circuit breaker to the ON position.
When the GFCI is operating normally, the GFCI indicator will continuously
light green.
Light order:
(red) Blink once (green) Light once (red) Blink once (green) Lights
continuously
• If the green GFCI indicator does not light on, press the GFCI RESET button.
• If the red GFCI indicator starts to blink continuously, contact an authorized
Honda Power Equipment dealer.
31Z238200.book 52 ページ ２０２０年２月２０日 木曜日 午前１０時５７分
To Next Page
Loading...
