OPERATION
51
5. When you switch the AC circuit breaker to the ON position, LED will turn off. If
the GFCI and AC circuit breaker do not function as described, take the
generator to an authorized Honda Power Equipment dealer for repair.
During generator use, if the AC circuit breaker trips, this usually indicates a
faulty power tool, appliance, or cord.
If that occurs, perform test steps 1 through 5 to verify that the GFCI and AC
circuit breaker are in proper working order. If the GFCI and AC circuit breaker do
test correctly, then the fault is likely to be in the power tool, appliance, or cord.
Repair or replace the faulty power tool, appliance, or cord before further use.
31Z238200.book 51 ページ ２０２０年２月２０日 木曜日 午前１０時５７分
To Next Page
Loading...
