24
Coolant Recommendation
The use of unsuitable antifreeze, hard water, or salt water may cause
corrosion damage that will shorten the life of the engine.
Fuel Filter
FUEL STRAINER
STRAINER ELEMENT
Use high quality ethylene glycol antifreeze that is specifically
formulated for use in aluminum engines. Mix the antifreeze with low-
mineral drinking water or distilled water.
A 50/50 mixture of ethylene glycol antifreeze and water is
recommended for most temperature and provides good corrosion
protection. A higher concentration of antifreeze decrease cooling
efficiency and is recommended only if additional protection against
freezing is needed. A concentration of less than 40% antifreeze will not
provide proper corrosion protection.
Inspect the fuel filter for dirt, water, or deposit, clean the fuel filter if
necessary (see page ).
Open the maintenance lid (see page ).1.
2.
19
43
06/03/10 13:17:03 32ZC6612_028
To Next Page
Loading...
