55
Generator use
Do not use the starter motor for more than 5 seconds. If the engine
fails to start, release the starter button, and wait at least 10 seconds
before operating the starter motor again.
ENGINE SWITCH
ON
STARTER BUTTON
STARTER BUTTON (with glow lamp)
START
Push the start button and hold until the engine starts.
The pilot lamp comes on after the engine starts.
Turn the engine switch on the remote control switch box to ON.
Turn the engine switch to ON position and wait until the glow lamp
of starter button (with glow lamp) goes off (for about 4 seconds).
For operation of the generator, refer to page thru .
4.
5.
6.
7.
32 35
06/03/10 13:23:05 32ZC6612_059
To Next Page
Loading...
