8 - 7
E - Edge Sharpen
An edge sharpen filter cleans up the edges of an image, making it look cleaner
and sharper. While edge sharpening does make the image look cleaner, it
also removes some fine detail from the original image. The strength of the
edge sharpen filter can be entered from 1 to 24. Entering a 23E gives the
sharpest edges, but also increases noise in the image.
0E Don’t sharpen image
(default)
14E Apply edge sharpen for typical image
n
e Apply edge sharpen using strength
n
(
n
= 1-24)
F - File Format
Indicates the desired format for the image.
0F KIM format
1F TIFF binary
2F TIFF binary group 4, compressed
3F TIFF grayscale
4F Uncompressed binary (upper left to lower right, 1 pixel/bit, 0
padded end of line)
5F Uncompressed grayscale (upper left to lower right, bitmap
format)
6F JPEG image
(default)
8F BMP format (lower right to upper left, uncompressed)
Example of Edge Sharpen at 0E: Example of Edge Sharpen at 24E:
To Next Page
Loading...
Need help?
General
