44
Changing system setup
System Setup
MENU
If the thermostat is reset to factory default
settings, you need to change the thermostat
settings to match your heating/cooling system.
Your contractor did this when the thermostat
was installed. Follow these steps to setup the
thermostat, or call your contractor to do it.
1 Touch MENU. The thermostat displays a list
of options.
2 Select System Setup. The thermostat
displays the first screen of options that you
can change.
3 On each screen, make changes as needed
then touch Next to display new options.
Repeat this step until you have made all
changes. Tables on pages 45-46
explain the System Setup screens and
options.
4 When you have made all changes, press
Done to save and exit.
Next
Touch the Help button
to see information
about screen options.
To Next Page
Loading...
Need help?
General
