Honeywell 954 SmartServo FlexLine User Manual

Part No: 4417341 Revision 10 Installation Manual 11
954 SmartServo FlexLine
Liability
The information in this Installation Manual is the copyright property of Honeywell.
Honeywell disclaims any responsibility for personal injury or damage to equipment caused
by:
 Deviation from any of the prescribed procedures,
 Execution of activities that are not prescribed,
 Neglect of the safety regulations for handling tools and use of electricity.
The contents, descriptions and specifications in this Installation Manual are subject to
change without notice. Honeywell accepts no responsibility for any errors that may appear
in this Installation Manual.
WARNING!
Only certified technicians are authorized to make changes on the 954
SmartServo FlexLine configuration. All modifications must be in accordance to
the guidelines as set forth by Honeywell. Modifications not authorized by
Honeywell will invalidate the approval certificates.
Labels
Figure 1 Identification Label with Safety Note on the 954 SmartServo FlexLine
NOTE:
This is a conceptual view of the type plate and therefore subject to change.

Honeywell 954 SmartServo FlexLine Specifications

General

Brand	Honeywell
Model	954 SmartServo FlexLine
Category	Measuring Instruments
Language	English