Installation instructions / ACS-2 plus 17
6.1.4 Ethernet connection (RJ45)
When installing an Ethernet interface card (Item no. 026840.29) instead of an RS 485 interface card, the ACS-2
plus can be linked to an existing network via Ethernet.
For more information about the interface installation, please refer to the mounting and installation instructions for
the interface.
6.2 Connection examples and networks
Example 1: Connection via interface converter. One or two RS485 lines, 5-wire line, ACS-2 plus only
application for up to 8 controllers with MultiAccess for Windows, 16 with IQ MultiAccess.
Example 4: Ethernet connection
Connection to the network via standard Ethernet cable (Cat 5 or higher) connected to a HUB, router or switch
via network terminal box (RJ45).
To Next Page
Loading...
