Honeywell ACS-2plus - Device Inputs; Digital Input Configuration; Alarm Line Configuration

Installation instructions / ACS-2 plus 55
ST 16 Description
1 - 3 Relay 3 (alarm) is activated during system failure
2 - 4 Relay 4 (tamper) is activated during system failure
3 - 5 Relay 3 (alarm) is deactivated during system failure
4 - 6 Relay 4 (tamper) is deactivated during system failure
13. Inputs
13.1 Digital inputs
The four digital inputs are freely programmable via NetEdit.
13.2 Alarm lines
The eight alarm lines are freely programmable via NetEdit.