50 Installation instructions / ACS-2 plus
Network device: In this field the network card used must be entered.
Example: 1=>W&T Com-Server
2 = Novar TR/AC Ethernet (Item no. 026840.20)
Change? Y/N:_
2. System: This menu items offers the following possibilities:
1. Software version
2. Init / Delete component
No.: _
Software version: This display is used for information only and cannot be
modified. It shows the firmware version of the device.
Example: Softw: ZACS2.01.00.00
Date: 02.06.03
Press <Enter>....
It is recommended to check this information first since the described
functions partly depend on the firmware.
Init / Erase component: This menu item makes it possible to delete or reinitialize the
content of the exception handler. The exception handler is
a reserved internal memory area in which operations which
are relevant for the operating system are logged like in a log
file. The evaluation of these data, e.g., in case of incorrect
operation of the controller, is reserved for Novar GmbH
employees.
If this log file is to be created at a certain time, the previous
content can be deleted via this function.
3. Save: If the modifications made are to be saved, this menu item must be selected
before quitting the setup via the menu item 4. Exit.
4. Exit See 3. Save.
When quitting the setup via this menu item without prior selection of menu
item 3. Save, all modification are ignored and the original settings are
maintained.
The setup and its consequences remain active until quitting the setup via
Exit!
To Next Page
Loading...
