Installation instructions / ACS-2 plus 69
Connection diagram for:
026011.00 Magnetic card mortise reader, fm
026017.00 Motorized magnetic card reader, fm
The terminals 14 and 15 of the reader must only be connected with motorized readers.
If only one reader is used, this reader is always connected as reader 1.
ACS-2 plus terminal assignment: DIP switch positions on the CPU board of the ACS-2 plus
(see chapter 8.5):
Switch
block
DI
P
Position Designation Reader
S2
1 ON Clock 1
Pull
down
1
2 ON Data 1
3 ON Clock 2
2
4 ON Data 2
5 OFF Clock 1
Pull
up
1
6 OFF Data 1
7 OFF Clock 2
2
8 OFF Data 2
To Next Page
Loading...
