Installation instructions / ACS-2 plus 71
Connection diagram for
026046.00 Magnetic card mortise reader, sm, with keypad
026047.00 Motorized magnetic card reader, sm, with keypad
026343.00 Chip card reader, sm, with keypad
026054.00 Magnetic card swipe reader, sm, with keypad
If only one reader is used, this reader is always connected as reader 1.
ACS-2 plus terminal assignment: DIP switch positions on the CPU board of the ACS-2 plus
(see chapter 8.5):
Switch
block
DIP Position Designation Reader
S2
1 ON Clock 1
Pull
down
1
2 ON Data 1
3 ON Clock 2
2
4 ON Data 2
5 OFF Clock 1
Pull
up
1
6 OFF Data 1
7 OFF Clock 2
2
8 OFF Data 2
To Next Page
Loading...
