Installation instructions / ACS-2 plus 77
Connection diagram for:
026420 Accentic reader proX2 without keypad
026421 Accentic reader proX2 with keypad
026422 Accentic reader mifare without keypad
026423 Accentic reader mifare with keypad
026424 Accentic reader Legic without keypad
026425 Accentic reader Legic with keypad
If only one reader is used, it is always connected as reader 1.
Terminal assignment ACS-2 plus: Settings of the DIP switches located on the CPU board of
the ACS-2 plus (see chapter 8.5):
Switch
block
DIP Setting Designation Reader
S2
1 ON Clock 1
Pull
down
1
2 ON Data 1
3 ON Clock 2
2
4 ON Data 2
5 OFF Clock 1
Pull
up
1
6 OFF Data 1
7 OFF Clock 2
2
8 OFF Data 2
To Next Page
Loading...
