Installation instructions / ACS-2 plus 79
Connection diagram for:
027660 Insertic 50 reader proX1/2
027662 Insertic 50 reader mifare
027664 Insertic 50 reader Legic
027666 Insertic reader proX1/2 without keypad
027667 Insertic reader proX1/2 with keypad
027670 Insertic reader mifare without keypad
027671 Insertic reader mifare with keypad
027676 Insertic reader Legic without keypad
027677 Insertic reader Legic with keypad
027676.10 Insertic reader Legic without keypad
027677.10 Insertic reader Legic with keypad
If only one reader is used, this reader is always connected as reader 1.
ACS-2 plus terminal assignment: DIP switch positions on the CPU board of the ACS-2 plus
(see chapter 8.5):
Switch-
block
DIP Position Designation Reader
S2
1 OFF Clock 1
Pull
down
1
2 OFF Data 1
3 OFF Clock 2
2
4 OFF Data 2
5 ON Clock 1
Pull up
1
6 ON Data 1
7 ON Clock 2
2
8 ON Data 2
To Next Page
Loading...
