Installation instructions / ACS-2 plus 81
Connection diagram for:
026484 Legic reader (Oris)
026485 Mifare reader (Oris)
If only one reader is used, this reader is always connected as reader 1.
ACS-2 plus terminal assignment: DIP switch positions on the CPU board of the ACS-2 plus
(see chapter 8.5):
Switch
block
DIP Position Designation Reader
S2
1 OFF Clock 1
Pull
down
1
2 OFF Data 1
3 OFF Clock 2
2
4 OFF Data 2
5 ON Clock 1
Pull
up
1
6 ON Data 1
7 ON Clock 2
2
8 ON Data 2
To Next Page
Loading...
