Data Field Programming
- 9 -
6
66
658
Zone 8 Alarm Report Code (Duress)
0 = No Report, 1-9, B-F (as described above).
Console Panic: Key B or *+#
6
66
659
NOT USED
(must be set to “00”)
6
66
660
Trouble Report Code
0 = No Report, 1-9, B-F (as described above).
Sent if zone has a trouble condition.
6
66
661
Bypass Report Code
0 = No Report, 1-9, B-F (as described above).
Sent when a zone is manually bypassed.
6
66
662
AC Loss Report Code
0 = No Report, 1-9, B-F (as described above).
Sent at a random time delay up to 1 hour. If AC is
restored before the report goes out, no report will be
sent.
6
66
663
Low Battery Report Code
0 = No Report, 1-9, B-F (as described above).
Sent when the system’s backup battery has a low-battery
condition.
6
66
664
Test Report Code
0 = No Report, 1-9, B-F (as described above).
Sent periodically to test that the communicator and
phone lines are operational.
6
66
665
Open Report Code †
0 = No Report, 1-9, B-F (as described above).
Sent upon disarming the system.
6
66
666
Close Report Code †
0 = No Report, 1-9, B-F (as described above).
† 2nd digit is automatically sent as the user number if
expanded or 4+2 reporting is selected.
Sent upon arming the system.
6
66
667
NOT USED
(must be set to “00”)
6
66
668
Cancel Report Code
0 = No Report, 1-9, B-F (as described above).
Sent upon disarming the system after an alarm has
occurred.
6
66
669
Group Restores for Trouble and Bypass
0 = No (Report for each restore); 1 = Yes (Report after all
zones restored)
Note: “1” not applicable to Contact ID Reporting
Restore Report Codes (
6
66
6
69-
6
66
6
75)
6
66
670
Alarm Restore Report Code
0 = No Report, 1-9, B-F (as described above).
2nd Digit is automatically sent as the 2nd digit of the
zone alarm report code programming in *50-*59, if
Expanded or 4+2 reporting is selected.
Sent when an alarm zone is restored to non-faulted
state.
6
66
671
Trouble Restore Report Code
0 = No Report, 1-9, B-F (as described above).
Sent when a trouble in a zone is restored.
6
66
672
Bypass Restore Report Code
0 = No Report, 1-9, B-F (as described above).
Sent when a zone that has been bypassed is unbypassed.
6
66
673
AC Restore Report Code
0 = No Report, 1-9, B-F (as described above).
Sent when AC power has been restored following an AC
power outage.
6
66
674
Low Battery Restore Report Code
0 = No Report, 1-9, B-F (as described above).
Sent when a system low-battery condition is restored to
normal.
6
66
675 -6
66
692 NOT USED
6
66
693
Reports per Armed Period
0 = 10 max total alarm + alarm restores; 1 = Unlimited
Limits the number of alarm/alarm restore reports
message pairs per zone sent to the Central Station in an
armed period.
Download Information (
6
66
6
94-
6
66
6
97)
6
66
694
Download Phone No.
Enter up to 12 digits. 0-9 # + 11 for *; # + 12 for #; # +
13 for 2 second pause
Enter the phone number of the downloading computer.
Do not fill unused spaces. If fewer than 12 digits exit
field by pressing * (and press 95, if entering next field).
To clear entries press *94*.
6
66
695
Ring Detection Count for Downloading
0 = Disable station initiated download; 1-14 = number of
rings (1-9, #+10 for 10, #+11 for 11, #+12 for 12, #+13
for 13, #+14 for 14); 15 = answering machine defeat
6
66
696
Initialize Download ID and Subscriber
Account Number
This must be done before the first
download. Once initiated, do not re-enter
another subscriber account number
manually. This would void the *96
command.
6
66
697
Zeroes all Program Fields
Resets all data fields to factory default settings.
Exit Program Mode (
6
66
6
98 or
6
66
6
99)
6
66
698
Exit Programming Mode
Prevents re-entry by [Master Code] + [Code] key + [0]
6
66
699
Exit Programming Mode
Allows re-entry by [Master Code] + [Code] key + [0]
To Next Page
Loading...
