90 Disp Option
1
Display Options
0 = no display
1 = display only
2 = chime only
3 = chime & disp.
[∗] to continue
Select whether faults on zones assigned to this zone type are
displayed at the keypad and/or cause a chime sound.
Alarm ID: 000
Trouble ID: 000
Contact ID Report Codes
000-999 = report code
[∗] to continue; returns to Enter
configurable zone type number
prompt.
Enter the desired 3-digit Contact ID report codes for faults and
troubles occurring on zones assigned to this zone type.
IMPORTANT: Make sure the code does not conflict with existing,
predefined Contact ID report codes. See the System
Communication section for a list of standard Contact ID codes.
5-17
To Next Page
Loading...
