Honeywell BW Icon - Operations; Activate the Detector; Self Test; Deactivate the Detector

Double press to enter the menu
Single press until the BLE icon is displayed
Hold press 3 secs to initiate the pairing mode.
1. In the Device list screen from the Device Configurator app, select the BW Icon Serial Number to start pairing.
The upper LED and the BLE icon will light in green after pairing succeed
2. In your Mobile device:
Tap on the Menu button
Select Remote Calibration or Bump
Follow on-screen instructions.
1. The process is complete when the results are displayed on your mobile device. You can now remove the cap by
pulling on the tabs.
IMPORTANT: Read the User Manual for complete information on the BW Icon operation.
File Downloads
User Guide
Honeywell, BW Icon, BW Icon, Gas Detector
Download [optimized]
Download
References
ha.us
honeywellanalytics.com
BW™ Trademark
Related Manuals
1. Honeywell Portable Single Gas Detector User Manual Gas Detection Quick Reference GuideHoneywell BW ™ Solo
Portable Single...
2. Honeywell Portable Air Conditioner, MM14CHCSCS User Manual OWNER’S MANUAL Read all instructions carefully
before setting up and...
3. Honeywell Portable Evaporative Air Cooler User Manual Honeywell Portable Evaporative Air Cooler User Manual Read
and save...
4. Honeywell Portable Air Conditioner [MN10CHESWW, MN12CHESWW] User Manual Honeywell Portable Air
Conditioner [MN10CHESWW, MN12CHESWW] User Manual – Optimized...
5. Honeywell Portable Air Conditioner, Dual Hose User Manual Portable Air Conditioner (Dual Hose) User Manual Read