EasyManua.ls Logo

Honeywell JTQJ-BF-01LM/BW User Manual

Honeywell JTQJ-BF-01LM/BW
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Honeywell GAS DETECTOR
The autonomous gas sensor (hereinafter referred to as the sensor) is a home
device for detecting a leak of natural gas (the main component is methane),
which, in the case of determining a high concentration of combustible gas
(methane) in the room, produces a light-sound alarm or sends a warning message
to the connected device.
Overview
Accessories
Alarm x1
Mounting plate x1
Battery x1
Holes for sound
«Sound/Self control» button
Holes for detecting a gas
The instruction x1
Plug dowel x2
Screw x2
Double-sided adhesive tape x2
Setup instructions
1. Connection terminal, output signal and device connection
* Even if the connection terminal is not connected to the device, the sensor will still
function.
* If you need to connect an electromagnetic solenoid valve or an output fan to the
wiring, please ask your dealer for assistance.
Сonnection terminal
Question and Answer IconNeed help?

Do you have a question about the Honeywell JTQJ-BF-01LM/BW and is the answer not in the manual?

Honeywell JTQJ-BF-01LM/BW Specifications

General IconGeneral
BrandHoneywell
ModelJTQJ-BF-01LM/BW
CategoryGas Detectors
LanguageEnglish

Summary

Setup Instructions

Connection Terminal, Output Signal, and Device Connection

Details on connecting terminals, output signal, and device, including a connection diagram.

Product Overview

Installation Guide

Fastening with Screws

Step-by-step instructions for installing the device using screws.

Mounting with Adhesive Tape

Instructions for mounting the device using adhesive tape.

Installation Precautions

Selecting an Installation Location

Functions

Power Supply for Preheating

Procedure for connecting the device to power and the preheating process.

Normal Working Status

Description of the device's indicator lights and self-test function during normal operation.

Alarm and Fault Status

Alarm Conditions

Details on audible and visual alarms triggered by gas concentration levels.

Fault Status

Information on device malfunctions indicated by yellow lights and beeps.

Duplicate Signal on Another Device

Procedure for activating signal duplication mode for alerts on other devices.

Main Parameters

Maintenance Procedures

Cautions and Safety

Faults and Troubleshooting

Actions on Gas Leakage

Warranty Service

Related product manuals