To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Midas and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Detection Technology | Electrochemical, Infrared |
| Sampling Method | Diffusion |
| Display | LCD |
| Communication | Modbus RTU, 4-20mA |
| Operating Temperature | -20°C to +50°C |
| Humidity Range | 0% to 95% RH (non-condensing) |
| Target Gas | Multiple gases |
| Response Time | < 30 seconds |
| Operating Humidity | 0% to 95% RH (non-condensing) |
| Outputs | 4-20mA |
| Protection Rating | IP66 |
| Certifications | ATEX, UL, CSA |
| Detection Gases | Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Methane (CH4), and others |
Details the main chassis, its display, pump module, and sensor cartridge chamber.
Describes the mounting bracket, terminal module, and connection ports for installation.
Explains the types of sensor cartridges and how they are fitted into the detector.
Details the standard and ventilated pyrolyzer covers for environmental protection.
Guidance on selecting the detector's location and mounting it securely.
Step-by-step instructions for mechanically installing the Midas detector unit.
Provides tables for calculating sample and exhaust tubing lengths and flow rates.
Describes using the Midas detector for local ambient monitoring.
Covers wiring requirements and typical installation diagrams for electrical connections.
Illustrates various electrical connection configurations for the Midas detector.
Details the procedure for refitting the main chassis to the mounting bracket.
Step-by-step instructions for installing the sensor cartridge into the detector.
Describes the display and indicators during normal gas monitoring operation.
Allows safe review of detector settings without making changes.
Introduces modes for setting changes, calibration, and testing the detector.
Explains how to navigate and view detector settings safely using review mode.
Details navigation for setup, calibration, and test menus.
Provides instructions for replacing the sensor cartridge.
Details the procedure for replacing the pump module.
Step-by-step guide for reassembling the detector after maintenance.
Instructions for easy replacement of the internal filter.
Procedure to perform a system leak check to ensure connections are secure.
Instructions for installing the pyrolyzer module onto the Midas gas detector.
Procedure for reassembling the detector with the pyrolyzer module installed.
Details how to configure the Midas detector after pyrolyzer installation.
Explains how to integrate the Midas gas detector into a LonWorks network.
Overview of LonWorks protocol, network variables, and behaviors.
Details the physical network components required for web server access.
Explains the IP address and netmask requirements for communication.
Guides on accessing and using the Midas web interface for diagnostics.
Illustrates standard installation configurations with relays and PLCs.
Shows typical installation diagrams using Modbus/TCP communication.
Details Power over Ethernet installation options and power budgets.
Lists complete Midas gas detector kits with part numbers.
Provides a list of available accessories and spare parts.
