Need help?Do you have a question about the Honeywell MultiRAE Series and is the answer not in the manual?
General| Model | MultiRAE Series |
|---|---|
| Target Gas | Multiple gases |
| Detection Gases | Oxygen (O2), Combustible gases (LEL), Toxic gases (CO, H2S), Volatile Organic Compounds (VOCs) |
| Detection Range | Varies by gas and sensor type |
| Sensors | Electrochemical, Catalytic Bead, Photoionization (PID) |
| Pump | Yes (built-in) |
| Display | LCD with backlight |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
| Humidity Range | 0% to 95% RH (non-condensing) |
| Communication | Bluetooth, USB, wireless (varies by model) |
| Alarms | Audible (95 dB), visual (LED), vibration |
| Certifications | ATEX, IECEx, UL, CSA |
Emphasizes the daily bump test for sensor response and alarm activation.
Mentions firmware versions for different MultiRAE models.
Lists warnings and cautions regarding operation and safety.
Outlines specific conditions for safe operation and component compatibility.
Compares features across MultiRAE Pro, MultiRAE, and MultiRAE Lite models.
Lists standard contents for four MultiRAE configurations.
Describes multi-threat monitoring and sensor compatibility notes.
Highlights multi-threat monitoring, customization, and wireless capabilities.
Explains the LCD display, sensor types, readings, and status icons.
Details icons indicating mesh radio status and signal strength.
Explains icons for BLE and LoRa connectivity status.
Explains icons for Wi-Fi status, messaging, and alarms.
Describes status icons and the instrument's three main keys.
Explains the automatic display flipping feature based on orientation.
Describes how to navigate screens in reverse order.
Explains how the display reconfigures based on the number of sensors.
Explains Hygiene Mode for continuous monitoring and Search Mode for selective sampling.
Explains Benzene-specific measurement using RAE-Sep Tube Cartridge.
Explains wireless module status and associated screens.
Details read-only wireless parameters for diagnostics.
Details how to use SSDC for setting up P2P operation.
Provides steps for installing a license key for P2P functionality.
Steps to enable P2P functionality via SSDC.
Instructions for connecting the MultiRAE for P2P communication.
Procedures for charging batteries using desktop cradle and travel charger.
Details how to mount and carry the MultiRAE in a vehicle.
Instructions for installing the truck mount.
Charging with AutoRAE 2 and step-by-step battery replacement.
Instructions for assembling external battery chargers.
Details the alkaline battery pack and its adapter.
Explains how to connect to SSDC without the full startup routine.
Procedure for powering on and off the MultiRAE instrument.
How to test alarms and use Glance Mode for information checks.
Steps to enter Glance Mode and pump status important notes.
Explains icons indicating calibration and bump test requirements.
How to toggle between readings and correction factors on the display.
Steps to enable Benzene operation and tutorial via SSDC.
Describes Hygiene, Search, and Benzene-Specific modes.
Procedure for attaching a RAE-Sep Tube Cartridge.
Steps to enter Programming Mode without a password.
Procedure for entering Programming Mode with a password.
Overview of menus and submenus in Programming Mode.
Basic ways to edit parameters and select sensors.
Information on bias voltage and equilibration time for specific sensors.
Note on simultaneous fresh air calibration for multiple sensors.
Performing span calibration on multiple sensors simultaneously.
Notes on Zero Calibration for CO2 and ppb PID Sensors.
Note on the calibration icon indicating sensor calibration status.
Calibration process for benzene sampling on specific models.
Procedure for performing bump tests on multiple sensors.
Note on the bump test icon indicating sensor bump test status.
Multi-Cal Sensor Group Selection.
Setting span values for specific PID sensors.
Note on PH3 Sensor Cross-Sensitivity with H2S.
Sensor On/Off Configuration.
Explains the organization of measurement gas lists.
Changing the display units for sensor data.
Details alarm settings, limits, and modes (Auto Reset, Latched).
Options for alarm outputs and comfort beep feature.
Indicates the Man Down icon and pre-alarm activation sequence.
Lists Man Down settings configurable via SSDC.
Details configurable parameters for Man Down via SSDC.
Describes panic alarm activation and its effects.
Details instrument alarm behavior in different modes.
How to access the Quick Access Menu.
How to send preconfigured messages.
How to check for received messages.
Procedures for clearing datalog and setting logging intervals.
Choosing sensors and data types for datalogging.
Details manual datalogging operation and snapshot datalogging.
How to turn the wireless radio on or off.
Explains the continuous wireless connectivity provided by roaming.
Setting the wireless channel for optimal connectivity.
How to automatically join a network with a specific PAN ID.
Restoring wireless settings to factory defaults.
How to change wireless settings for Wi-Fi equipped instruments.
How to turn BLE radio on or off.
Adjusting the display contrast.
Describes continuous monitoring in Hygiene Mode and selective sampling in Search Mode.
Configuration options for pump speed, startup calibration, and fast startup.
Settings for benzene mode, temperature units, language, and site identification.
Settings for user identification, date/time formats, and user modes.
Configuring the display backlight and automatic LCD flip.
Procedure for setting policy enforcement using SSDC.
Policy settings for bump and calibration enablement/disablement.
Enforcement options for calibration and bump tests (Can't Bypass, Can Bypass).
How to test the instrument's alarms.
Daily recommendation for bump testing and calibration requirements.
Instructions for installing the calibration adapter on different models.
Importance of sensor warm-up and shortcut to bump test menu.
How to test the gamma radiation sensor.
Critical notes for zeroing CO2 and ppb PID sensors.
Ability to abort calibration and overview of span calibration.
Information on enabling three-point calibration via SSDC.
Steps to enable 3-point calibration for specific models via SSDC.
Guided calibration process for additional sensors.
Step-by-step procedure for single-sensor span calibration.
Describes Normal Mode and Radiation-only Mode for MultiRAE Pro.
Steps to activate gamma-only measurement mode.
Steps to exit gamma-only mode and switch to normal or gas-only mode.
How to connect for datalog download and firmware updates.
How MultiRAE interacts with SSDC for data and firmware.
Details the two-step firmware upgrade process.
Instructions for removing and installing the rubber boot.
Procedures for replacing filters on different models.
Steps for sensor module replacement and cleaning.
Steps for PID module cleaning and replacement.
Describes different alarm signals and conditions.
Summary of alarm signals, buzzer, LED, display, and vibration in Hygiene Mode.
Details general alarms, messages, conditions, and indications.
Steps to enter Diagnostic Mode to set pump stall thresholds.
How to set pump stall threshold values using the dynamic method.
How to set pump stall threshold values using the static method.
Steps to configure Wi-Fi communication parameters using SSDC.
Selecting the default power setting for Wi-Fi.
Information on MAC address, IP settings, and Wi-Fi channels.
Details different types of wireless security for network protection.
Understanding and configuring the SSID for wireless networks.
How to set up pre-set messages for Wi-Fi instruments.
Explains App Mode for Honeywell apps and Profile Mode for third-party systems.
Instructions for pairing BLE module in App Mode.
Physical dimensions, weight, and available sensor types.
Details on battery, display, sampling, and calibration specifications.
Specifications for alarms, datalogging, and communication features.
Information on compliance, tests, languages, and warranty details.
Detailed specifications for various sensor types.
LEL sensor specs and correction factors for different compounds.
Table for identifying instrument manufacture year and month.
Lists low, high, STEL, and TWA alarm limits for various sensors.
Detailed specifications for various sensor types.
Information on PID sensors, including part numbers and descriptions.
Information on combustible sensors, including part numbers.
To Next Page