Reverse Direction
Sometimes you want to go back to a previous screen rather than advance through an entire set
of screens before “wrapping around” to that screen again.
To reverse direction:
1. Press and hold [N/-] for 3 seconds.
2. When the arrow changes from pointing to the right to pointing to the left, release your
finger.
Now when you press [N/-], you step back through the screens.
To change direction again: Press and hold [N/-] for 3 seconds and then release.
Note: Changing direction does not work with all screens.
Honeywell MultiRAE Series™ 25 User Manual
To Next Page
Loading...
Need help?
General
