Charging Batteries with A MultiRAE Battery Charger
The MultiRAE Battery Charger is designed to charge MultiRAE-family batteries when they are
not installed in an instrument. If you are using a single MultiRAE Battery Charger, you only
need the 0.5A power supply (P/N: 500-0036-100 or 500-0036-101), which comes with a
universal power cord. The One-To-Five Power Cable and Holder for External Battery Charger are
only necessary if you have multiple MultiRAE Battery Chargers.
Assembly
1. Assemble multiple External Battery Chargers on a Holder for External Battery Charger as
shown:
Holder for External Battery Charger (P/N: M01-2110-000)
External Battery Charger (P/N: M01-3025-000)
2. Connect the power cables and the power supply:
1 One-To-Five Power Cable P/N: 020-2480-000)
2 Power Supply (P/N: 500-0087-000)
3 Power Cord with U.S. Plug P/N: 410-0036-000), or
Honeywell MultiRAE Series™ 47 User Manual
To Next Page
Loading...
