Screen Display for Various Numbers of Active Sensors
The MultiRAE family of instruments can display readings from one to six sensors (including
dual sensor), depending on the configuration. In order to maximize readability and the amount
of information shown, the display is automatically reconfigured, according to the number and
types of sensors in the MultiRAE.
If the configuration includes five sensors, and one of them is a PID, then the lamp value is
shown, along with the currently applied correction factor (CF) and measurement gas.
One sensor. Two sensors. Three sensors.
Four sensors.
Five sensors,
including Gamma
radiation sensor.
Five sensors,
including PID.
Six-sensor
configuration with
CO+H
2
S combo
Honeywell MultiRAE Series™ 26 User Manual
To Next Page
Loading...
